• Total Acoustics™ Performance (NRC+CAC)
• High sound absorption for reduced reverberation and quieter spaces
• High sound attenuation, improving room to room privacy
• Cost effective ceiling solution
• Reliable, proven performance
• High light reflective finish
• RH99 Humidity Resistant
• Sustainable – Green Star® contribution

Cartons should be opened carefully to ensure that tiles can be removed without damaging the edges of the tiles. It is recommended that tiles are cut with a sharp knife. Unnecessary breakage of tiles should be avoided. Care is necessary when handling and installing tiles, to prevent finger marking of the surface from soiled or greasy hands, and where appropriate, clean cotton gloves should be worn. Installation of ceiling tiles should only take place after the completion of any work generating large amounts of dust.

The ceiling installer is responsible for the satisfactory installation of the ceiling and adherence to industry best practice and in accordance with AS/NZS2785:2020

Note: The acoustical panels shall not support any other material as this may effect dimensional stability.

Armstrong mineral fibre ceilings are INTERIOR FINISHES ONLY and conditions during the installation should reflect this. Panels cannot be used in exterior applications, where standing water is present, or where moisture will come in direct contact with the panels.

Armstrong recommend during installation that the relative humidity (RH %) should not exceed 99%, within a 0–49°C temperature range (with the exception of Bioguard Acoustic OP RH100 panels, which can be installed in conditions of 100% RH, including “standing water” applications, within 0–49°C).